For pressurisation, deaeration and topping up in sealed heating installations (acc. to EN12828) and chilled water (cooling) installations.
The Flamcomat MP G4 Remote is a pump-controlled, low-maintenance expansion unit that efficiently absorbs differential pressures in heating and cooling installations and effectively removes gas. After all, the formation of gas in the installation can cause dirt accumulation, corrosion and wear, leading to faults and a loss of efficiency. Investing in the Flamcomat MP G4 Remote means opting for certainty and flexibility. The Flamcomat MP G4 Remote has a number of automatic functions, for the filling procedure and balancing, temperature monitoring and leak detection. The system is also suitable for connecting to a smart Co-Operation mode configuration and for communicating with it remotely (with the Flextronic and Remote Service).
Flamconnect Remote
On the Flamcomat MP G4 Remote, you get 3 years Flamconnect Remote for Free! With Flamconnect Remote, you can see via our dashboard the status of your device. You can see, for example, the actual and historical telemetry, like pressure in the system and the water level in the vessel. You can get an immediate notification when an installation or product has a malfunction and check and analyse the error via the portal. Remotely change product settings without visiting the product. Be able to solve issues remotely and thus decrease the number of service visits. When you do need to go on site, you arrive on site at the right time with a lot of information. As a result, the costs of maintenance are reduced considerably.
Flextronic
The Flextronic is a new control platform developed by Flamco for further optimising the performance of its automats and expanding their functionality. At the same time, Flamco brings (wireless) remote communication and data that enables preventative maintenance.
Flamcomat MP G4 Remote
- Scalable thanks to the Co-Operation mode option.
- If you have a unit with multiple pumps and valves, balancing ensures that the runtime of the components is automatically and evenly distributed.
- Suitable for installations with high temperatures (> 110 °C) in combination with accessory 17504.
- Automatically performs volumetric control and automatic topping-up during the heating or cooling cycles.
Integrated turbo degassing allows for very rapid degassing. - The degassing function allows for continuous degassing if desired.
- Due to the hydraulic design of the Flamcomat MP G4 Remote and the connection sets, the vessel can be positioned anywhere around the Flamcomat.
- Beams are fitted to the Flamcomat MP G4 Remote for the protection of components and easy transport into hard-to-reach places.
- The position of the second pump on a double pump Flamcomat MP G4 Remote can be positioned on either side of the Flamcomat.
Flamconnect Remote
- Receive alerts, analyse the system and product and adjust settings and thus;
- improve your service, at 30% lower costs,
- reduce service visits up to 75%,
- increase the first-time fix rate,
- easier commission products,
- improve system performance.
- Simple commissioning (via the Flamconnect App).
Flextronic
- Optimal connectivity with BMS, Modbus, BACnet via RS 485 and ethernet interface.
- Extensive data storage for online and offline analysis.
- ‘Extended screen’ operation via mobile or tablet device.
- Also suitable for existing automats (available as a retrofit kit).
- Three configurable potential-free outputs.
- The user-friendly control unit displays all operating and error conditions in a comprehensible and convenient way.
- Advanced technology ensures the lowest power consumption, long service life and easy maintenance.
- Operating modes: single (mono), automatic change-over or load dependent (duo) and combined operation.
- Microprocessor control, self-learning, with graphical display.
