Hydraulic Balancers

The Flexbalance EcoPlus C allows hydraulic separation between the primary and secondary circuits of commercial heating and cooling systems with air and dirt separation.

• No more overloaded pumps.
• Improved accurate regulation of the system.
• Considerably improved heat transfer.
• Higher output by the system.
• Integration of air and dirt separation.
• Compact.
• Heat transfer level of 99%.
• Low flow resistance.

Flexbalance EcoPlus C

Equipped with a Flexvent Top ⅜" white (28510).

Equipped with a brass drain valve ½" and a hose connection.

For balancing hydraulic pressure in heating installations consisting of multiple circuits and pumps. Flexbalance Plus hydraulic balancers are supplied with an automatic air vent, a dirt chamber and a connection for a temperature sensor. The sensor can be connected using an immersion pipe (G ½"). The use of our patented PALL-ring technique enables a better response, returns higher efficiency, decreases total built-in height and shares its deaeration and dirt separation benefits.

• With flanged connections.
• Integration of air and dirt separation.
• No more overloaded pumps.
• Improved accurate regulation of the system.
• Considerably improved heat transfer.
• Higher output by the system.
• Excellent hydraulic control in combination with a large air and dirt separation capacity.
• Smaller construction height than standard hydraulic separators.

Flexbalance Plus F

Flexbalance Plus F side view

Flexbalance EcoPlus C

• Working pressure: 0.2 - 10 bar.
• Minimum/Maximum working temperature: -10 °C / 110 °C.
  Equipped with a Flexvent Top ⅜" white (28510).
• Equipped with a brass drain valve ½" and a hose connection.
• Suitable for the addition of glycol-based anti-freeze up to 50%.
• Vessel: steel ST 37/2, red coated RAL 3002.
• Insulation: EPP
• A temperature sensor can be inserted in the sensor connection (G ½") with an immersion pipe.
• Inner diameter: 12.5 mm.
• Coupling (4x) with conical seal, galvanised steel.

Flexbalance Plus F

• Minimum/Maximum working pressure: 0.2 - 10 bar.
• Suitable for systems with a maximum flow temperature of 120 °C.
• Suitable for glycol solutions up to 50%.
• Maximum flow rate:
• Primary circuit: 2 m/s
• Secondary circuit: 1.2 m/s.
• With welding connections.
• Flexbalance DN150 and larger: Standard equipped with legs.

** For full technical details, please visit our Product Portal. **