Home | Products | Hydronic Flow Control | Air/Dirt Separation and Dosing | Degassers
Degassers
Efficient Gas Removal for System Protection
Degassers eliminate dissolved and entrained gases from liquids, helping to prevent corrosion, reduce noise, and improve the efficiency and longevity of heating and cooling systems. Explore our range of degassers designed to protect your system and maintain optimal performance.
Vacumat Eco G4 Remote
The Vacumat Eco G4 Remote is a pressure-temperature controlled degasser. The unit removes gases not only extremely accurately but also way more effectively, efficiently and in an energy-efficient manner. When compared to conventional degassers, the Vacumat Eco G4 Remote performs up to 8x better, due to its much greater and fully continuous degassing capacity. Quick removal of gases limits damage to the system as much as possible, avoiding unnecessary faults and expensive repairs, as well as extending the life of the system.
Flamconnect Remote
On the Vacumat Eco G4 Remote, you get 3 year Flamconnect Remote for Free! With Flamconnect Remote, you can see via our dashboard the status of your device. You can see, for example, the actual and historical telemetry. You can get an immediate notification when an installation or product has a malfunction and check and analyse the error via the portal. Remotely change product settings without visiting the product. Be able to solve issues remotely and thus decrease the number of service visits. When you do need to go on site, you arrive on site at the right time with a lot of information. As a result, the costs of maintenance are reduced considerably.
Flextronic
The Flextronic is a new control platform developed by Flamco for further optimising the performance of its automats and expanding their functionality.
Vacumat Eco G4
- Quick degassing.
- Energy efficient.
- Smart Flextronic controller.
- Intelligent degassing.
- Extremely quiet.
- Delivered completely pre-assembled and ready for operation.
- Easy to install and commission.
Flamconnect Remote
- Receive alerts, analyse the system and product and adjust settings and thus;
- improve your service, at 30% lower costs,
- reduce service visits up to 75%,
- increase the first-time fix rate,
- easier commission products,
- improve system performance.
- Simple commissioning (via the Flamconnect App).
Flextronic
- Optimal connectivity with BMS, Modbus, BACnet via RS 485 and Ethernet interface.
- Extensive data storage for online and offline analysis.
- ‘Extended screen’ operation & commissioning via mobile or tablet device.
- Also available as an upgrade for existing automats (available as a retrofit kit).
- Three configurable potential-free outputs.
- The user-friendly control unit displays all operating and error conditions in a comprehensible and convenient way.
- Advanced technology ensures the lowest power consumption, long service life and easy maintenance.
- Microprocessor control, self-learning, with graphical display.
Vacumat Eco G4 Remote
For active degassing and automatic topping up of closed heating and cooling systems.
The ENA is a pressure step degasser that makes use of a vacuum for highly efficient degassing of closed systems. Moreover, the ENA ensures automatic topping-up of the system after the top-up water has been degassed.
Can be easily used in combination with a Flexcon diaphragm pressure expansion vessel or pressure expansion automat.
- Active degassing by patented PALL-Ring technology.
- The menu of the control unit is available in 18 languages.
- Easy to use.
- Fully assembled and ready to connect.
- Compact and robust design.
- The controller can be programmed as required. Connection to BMS possible (RS 485).
ENA 7 - 30
Vacumat Eco G4 Remote
Complies with the following guidelines:
- Machinery Directive 2006/42/EC.
- Radio Equipment Directive: 2014/53/EU.
- RoHS: 2011/65/EU.
ENA 7 - 30
- Working temperature: 3 °C to 70 °C.
- Maximum (feed) supply temperature in the system: 120 °C.
- Ambient temperature: > 3 °C to 45 °C.
- Maximum pressure in the suppletion feed line: 2 to 8 bar.
- Noise production: approx. 55 dB(A).
- Electrical connection 230 V 50 Hz.
- Suitable for the addition of glycol-based anti-freeze up to 30%.
- Complies with the following guidelines:
- Machinery Directive
- 2006/42/EC.
- PED 2014/68/EU.
- Connectivity to a Building Management System (BMS), yes, by means of a dry contact.
** For full technical details, please visit our Product Portal. **
NFE 1 Top-up Unit
For heating and chilled water (cooling) installations.
Used for direct top-up from potable water supply according to DIN 1988 and DIN EN 1717.
NFE can be combined with MVE.
Consists of a backflow preventer, water meter, ball valve and and non-return valve.
Technical Details:
- Maximum working pressure: 10 bar.
- Maximum working temperature: 65 °C.
NFE 1 Top-up Unit
NFE 2 Top-up Unit
For heating and chilled water (cooling) installations.
Used for top-up from a water supply where a backflow preventer is not needed.
NFE can be combined with MVE.
Consists of a water meter, ball valve and non-return valve.
Technical Details:
- Maximum working pressure: 10 bar.
- Maximum working temperature: 90 °C.
NFE 2 Top-up Unit
Impulse Output Water Meter
Technical Details:
- PN 10, 90 °C.
- 50 Hz.
Impulse Output Water Meter