Dirt Separators

For use in sealed heating and cooling systems.

Dirt separators protect the boilers, pumps and fittings from damage caused by the deposit of dirt particles. Dirt separators also offer benefits when applied to existing systems or when converting an open system to a closed system.

• Prevents the deposit of dirt particles in the boiler.
• The removal of dirt particles from the system water extends the service life of pumps, control equipment and other system accessories.

The Flamco Clean Smart dirt separators remove even minuscule dirt particles from the system water. They are virtually maintenance-free, and the flow resistance is negligibly low.

• With an EPP insulation mantle included.
• 60% better performance compared to conventional separators.
• Flow velocity up to 3 m/s.
• Four neodymium supermagnets are incorporated into the logo.
• It can be used with all kinds of pipework.
• Compact dimensions, light weight.
• Extremely low flow resistance and low loss of energy.
• Consistent performance throughout its service life.
• EPP insulation thickness: 20 mm.
  Insulation value (λ): 0.036 W/mK.

Flamco Clean Smart EcoPlus with insulation.

Flamco Clean Smart EcoPlus without insulation. This shows the magnet on the outside of the item that takes magnetic materials out of the water flow.

Flamco Clean Smart EcoPlus without insulation. This shows the magnet on the outside of the item that takes magnetic materials out of the water flow. When removing drag down.

Double thrust function in the process of the dirt separator.

For use in sealed heating and cooling systems.

Dirt separators protect the boilers, pumps and fittings from damage caused by the deposit of dirt particles. Dirt separators also offer benefits when applied to existing systems or when converting an open system to a closed system.

• Prevents the deposit of dirt particles in the boiler.
• The removal of dirt particles from the system water extends the service life of pumps, control equipment and other system accessories.

The new steel Flamco Clean Smart dirt separators remove even the most minuscule dirt particles from the installation water. The Flamco Clean Smart performs 60% better than conventional dirt separators, whilst the flow resistance has been reduced to a negligible level.

• With flanged connection according to EN 1092-1 PN16.
• Up to 60% better performance compared to conventional dirt separators.
• Extremely low flow resistance results in less energy consumption.
• Standard flow speed up to 3 m/s.
• Twenty-five neodymium supermagnets are incorporated into the dirt scraper.
• Constant performance during the entire lifespan.
• Low maintenance

Flamco Clean Smart F - 10.0 bar without insulation.

Flamco Clean Smart F - 10.0 bar with insulation.

Dirt Separator Flamco Clean Smart F inside design.

Flamco Clean Smart EcoPlus

• Materials: brass and high-quality plastic.
• Minimum/Maximum working temperature: -10 °C / 120 °C.
• Minimum/Maximum system pressure: 0,2 bar / 10 bar.
• Suitable for the addition of glycol-based anti-freeze up to 50%.
• Suitable for the addition of ethanol-based anti-freeze up to 30%.
• 20 mm EPP insulation mantle with insulation value (λ) of 0.036 W/mK.

Flamco Clean Smart F - 10.0 bar

• Maximum working pressure: 10 bar.
• Models with a maximum working pressure of 25 bar are available upon request.
• Suitable for systems with a maximum flow temperature of 110 °C (DN50, DN65 120 °C).
• Suitable for the addition of glycol-based anti-freeze up to 50%.
• Suitable for the addition of ethanol-based anti-freeze up to 30%.
• In accordance with Pressure Equipment Directive 2014/68/EU.

** For full technical details, please visit our Product Portal. **