Expansion Vessels Wall Brackets

A complete product for hanging expansion vessels up to 25 litres attached to the water supply and the wall. As the conventional Flexconsole, but including accessories.

Equipped with a wall plate with two slots for accurate wall mounting.

Flexconsole Plus

For mounting Flexcon expansion vessels (2 - 25 litres) to a wall.

With the Flexconsole, the Flexcon vessel is set up vertically, fitted to the water connection, with the water nipple attached to the ¾" connection of the console, and the expansion pipe connected to the ½" connection.

Flexconsole ¾

For mounting Flamco clench ring vessels 8 - 25 litres. Provided with a slot into which the vessel clench ring fits precisely. Tightening the two bolts is all that is needed to make a sturdy connection.

MB2 Universal

For direct, flexible connection to the expansion vessel return line with a max. diameter of 440 mm.

Comprising:

• Meiflex reinforced hose ¾" F x ¾" F, flat sealing, 700 mm in length.
• 2 ¾" seals.
• MM service coupling ¾" (for detaching the expansion vessel without draining the system).
• Angle wall bracket with two screws, washers and rawl plugs respectively for surface mounting.

M66326.11 - Connector set for expansion vessel

Flexconsole Plus

Supplied with:

• Flexcon pressure gauge (0 - 4 bar) with shut-off valve,
• Flexvent 3/8 floatvent with shut-off valve,
• Safety valve ½" (set pressure: 3 bar),
• Flexfast quick-release coupling,
  Fixing the set.

Flexconsole ¾

• Equipped with a wall plate with two slots for accurate wall mounting.
• Supplied with a ½" radiator cap plus manual deaerator.

MB2 Universal

• Material: Steel, zinc-coated.
• Connection to the wall with two Ø8 plugs and two Ø6 screws with hexagon head (wrench 10).
• Connection of the vessel to the MB using two M5 bolts with a cross head.

** For full technical details, please visit our Product Portal. **