VSH Xpress Gas
Piping & Press Fittings for Gas Systems
Home | Products | Innovative Piping | Piping Systems | VSH XPress Gas
Reliable pipe and fittings for gas systems.
The VSH XPress GAS SYSTEMS product range, distributed by KE KELIT NZ, comprises two distinct systems: stainless steel press fittings and pipes, and copper press fittings and pipes, each specifically designed for efficient gas conveyance in gas applications. Both systems are purpose-built to ensure safe and reliable distribution of gas.
The VSH XPress GAS fittings stand out with their unique “M” profile, offering durability and precision in gas piping systems, and are suitable for a wide range of specialized press fittings for diverse gas applications.
VSH XPress GAS products are crafted using high-tech machinery in a fully automated factory, ensuring the delivery of safe, high-quality gas system components. This advanced manufacturing process of VSH XPress GAS systems guarantees top-tier quality and reliability. Each product within the range is marked with traceable batch identification, allowing for the tracking of raw material origins and suppliers. Mill certificates for these products are available upon request, further attesting to their quality.
The VSH XPress GAS range is designed for gas applications, which underlines its specialised use.
- KE KELIT COPPERFIX hard and half-hard copper piping is available
- Suitable for Natural Gas and LPG applications
Stainless Steel:
VSH XPress Stainless Steel GAS fittings with stainless steel pipes that satisfy DVGW worksheet
VP614, SVGW Data sheet G1/01 and ÖVGW PG 314.
O-rings: HNBR* (yellow)
Operating temperature: -20°C to +70°C
Operating pressure: Max. 5 bar inside and outside
Application: Inside (HTC**, proven tightness of the connection at 650°C for 30 min) or outside buildings. During construction and in concrete, above and under screed within buildings, corrosion protection is recommended. Outside of buildings, only lay above ground. Local regulations must always be observed.
* Hydrogenated Nitrile Butadiene Rubber
** Higher Thermal Capacity
Copper:
VSH XPress Copper GAS fittings with copper pipes that satisfy EN1057 R250/R290.
O-rings: HNBR* (yellow)
Operating temperature: -20°C to +70°C
Operating pressure: Max. 5 bar inside and outside
Application: Inside (HTC**, proven tightness of the connection at 650°C for 30 min) or outside buildings. During construction and in concrete, corrosion protection is required (see Section 2.9). Not for installation below ground, unless in protective ducting. Outside of buildings, only lay above ground. Local regulations must always be observed.
* Hydrogenated Nitrile Butadiene Rubber
** Higher Thermal Capacity
Material:
Stainless Steel:
X5CrNiMo 17 12 2 material no. 1.4401 in accordance with DIN-EN 10088
Copper:
DHP copper material no. CW 024A in accordance with DIN EN 1412
Pipe Size:
Pressfitting-system:
12, 15, 18, 22, 28, 35, 42, 54, 67, 76, 89*, 108 mm
*89 is only available on Stainless Steel.
Tests:
DVGW, BSI, ÖVGW, SVGW
Press components, d15-108 mm, with HNBR seals. Important: O-rings used for gas applications DO NOT have a leak before pressed function for safety reasons.
Press fittings:
Straight and elbow adaptors with male and female threads. Demountable flange and union fittings
Press profile: M