Home | Products | Fixing Technology | Pipe Clips
Pipe Clips
A solution for fixing a wide range of installations.
Whether you need ceiling or wall-mounted clips, there is a solution. We have a wide range of mounting clips with a variety of closures, connections and finishes. With or without sound-absorbing rubber lining. For the smallest to the largest pipes. Clips make sure you can mount every pipe, everywhere.
BSA M 8/10 Clips
BSA clips are rubber-lined universal clips for mounting pipes to the wall or ceiling. Thanks to the unique locking system, the pipe can be pre-mounted without the use of tools. This means that the pipe's position can be adjusted afterwards if necessary, and the position of a bend or a T joint determined more accurately. At this stage, the fixing bolt can be tightened so that the pipe is held and the installation completed.
- Fast assembly thanks to the patented locking system with click-spring.
- Easy pre-assembly without the need for tools and without the pipe coming away from the clip.
- Minimal headroom requirement, making it possible to mount pipes directly to the ceiling.
- Stout material and reinforcement grooves ensure stability and rigidity.
- Rubber inlay clamped to the clip ensures that the rubber will not be displaced, should the pipe move in any way.
BSU Clips
BSU clips are designed for mounting steel pipes to the wall or ceiling.
- With a retaining ring.
- Close-fitting possible.
- Bolt with slot and cross head.
CK Clips
For mounting insulated pipework to the wall and ceiling.
- CK 0 - 15: Suited with a quick-locking system and special retaining Phillips head screws.
- CK 16 - 18: Fitted with retaining rings to prevent loss of the Phillips head screws.
- CK 19 - 26: Fitted with hex nuts and bolts for high loads.
RSF Clips
RSF clips are designed for heavy duty applications and fixed point constructions. The thickness of the material and the reinforcement ribs make the most rigid assemblies possible.
- Complete and comprehensive range.
- A special combinut with outer and inner threads makes a broad range of applications possible in combination with threaded rods and pipes.
- Execution:
- RSF G ½ M / M 10, G ½ M / M 12 and G ¾ M / M 16:
- Special welded-on nuts on the clip flanges allow high torque on the fixing bolts and permit heavy loads on the clip whilst easing installation.
- Bolt with retaining ring.
- The head of the bolt has a slot, a Pozidriv 2 (PZ2) and hexagon for fast installation with a flat or cross-head screwdriver or a spanner.
- RSF G ¾ M / M 12/16:
- Equipped with two hexagon bolts.
- RSF G ½ M / M 10, G ½ M / M 12 and G ¾ M / M 16:
BRS Clips - Stainless Steel
Stainless steel universal clips for mounting stainless steel pipes to the wall or ceiling.
For use in situations where stainless steel mounting material is desired or required, such as food processing, facilities, laboratories, the chemical industry, etc.
- Suitable for short-distance mounting.
BRS-A Clips - Stainless Steel
Stainless steel universal clips with rubber strips for mounting pipes to the wall or ceiling.
For use in situations where stainless steel mounting material is desired or required, such as food processing, facilities, laboratories, the chemical industry, etc.
- Suitable for short-distance mounting.
BSA ½ M / M 10 Clips
BSA clips are rubber-lined universal clips for mounting pipes to the wall or ceiling. Thanks to the unique locking system, the pipe can be pre-mounted without the use of tools. This means that the pipe's position can be adjusted afterwards if necessary, and the position of a bend or a T joint determined more accurately. At this stage, the fixing bolt can be tightened so that the pipe is held and the installation completed.
Similar to the BSA M 8 clips, but with a combined M 10 - G ½" M connection.
- Fast assembly thanks to the patented locking system with click-spring.
- Easy pre-assembly without the need for tools and without the pipe coming away from the clip.
- Minimal headroom requirement makes it possible to mount pipes directly to the ceiling.
- Stout material and reinforcement grooves ensure stability and rigidity.
- Rubber inlay clamped to the clip ensures that the rubber will not be displaced, should the pipe move in any way.