CONVECTORS/TRENCH CONVECTORS

Horizontal Design

KK Connection Dimensions [mm]

A) Side connections
B) Connection vertically from below: Models with an overall height of 142, 214 or 286 mm can also be delivered with supply and return connections vertically from below (as special designs and with a supplementary charge)

Height	70**	142	214	286
Boss spacing	32	102	174	246
Boss spacing	Overall length - 50 mm

** Only available with top-bottom, opposite ends, side-connection.
Note: with an overall height of 70 mm, vertical connection from below is not available!

Flow

Return

Vent plug

KK-S Connection Dimensions [mm]

A) Side connections
B) Connection vertically from below: Models with an overall height of 142, 214 or 286 mm can also be delivered with supply and return connections vertically from below (as special designs and with a supplementary charge).

Height	70**	142	214	286
Boss spacing	32	102	174	246
Boss spacing	Overall length - 50 mm

** Only available with top-bottom, opposite ends, side-connection.
Note: with an overall height of 70 mm, vertical connection from below is not available!

Flow

Return

Vent plug

KH Connection Dimensions [mm]

 

Height	358	430	502	574	646	790
Boss spacing	318	390	462	534	606	750

---

Vertical Design

---

KS Connection Dimensions [mm]

Height	1600	1800	2000	2200
Boss spacing	1550	1750	1950	2150

CONVECTORS KONTEC HORIZONTAL AND VERTICAL

KONTEC convectors and horizontal heating panels are radiators in fully welded designs, with either 1 to 5 layers of steel rectangular water flow pipes arranged one-behind-the-other (for convectors), or 1 or 2 such layers (for horizontal heating  panels). In each layer, the convectors have between one and four pipes arranged one-above-the-other; the horizontal heating panels have from 5 to 11 pipes. KONTEC vertical heating panels consist of 1 or 2 layers of steel rectangular water-flow pipes, arranged one-behind-the-other, with 2 to 12 steel pipes, arranged side-by-side. A 2 mm space between the heating pipes guarantees additional resistance to corrosion. KONTEC convectors and horizontal heating panels come with side panels and top covers; KONTEC vertical heating panels come with side panels. KONTEC heating panels are delivered with welded mounting brackets.

All KONTEC convectors and heating panels are also delivered with factory-sealed drain plugs and pivotable vent plugs. (Exception: bottom-opposite-end connection models come with a dummy plug instead of the drain plug.)

Standard design: rectangular steel pipes, 70 x 11 x 1.5 mm
High-pressure design: rectangular steel pipes, 70 x 11 x 2.0 mm

• Dimensions:
  • Horizontal:
    • Overall lengths: between 500 and 1400 mm (in increments of 100 mm) and between 1600 and 4000 mm (in increments of 200 mm)
    • Overall heights: 358, 430, 502, 574, 646 or 790 mm
  • Vertical:
    • Overall lengths: between 142 and 862 mm (in increments of 72 mm)
    • Overall heights: between 1600 and 2200 mm (in increments of 200 mm)
•  Coating:
  • Undercoat: electrophoretic, using water-soluble paints, conforming to DIN 55900 part 1, stoved at 165° C;
  • Finish: electrostatic powder coating, conforming to DIN 55900 part 2, in a state-of-the-art facility.
• Connections: 2 x internal thread G 1/2", welded-in for supply and return. Vent and drain plugs (or dummy plug) are factory sealed and fitted according to customer's specifications.

BROCHURES

TECHNICAL DATA

SOFTWARE

DFX 2D-VECTOR GRAPHICS